Selling a large collection of GE/Jasco, Enbrighten, and Evolve Z-Wave switches, dimmers, motion controls, and plug-in modules. These were removed when I converted our vacation home to Lutron Caséta.

There are 40 commercial switches/modules, plus 2 custom-made garage-door relay adapters, for 42 physical pieces total.

Included

In-wall on/off switches

• 17 × GE/Jasco ZW4001 relay/on-off switches\
• 3 × ZW4008 on/off switches — 2 GE/Jasco-labeled and 1 Enbrighten-labeled\
• 1 × GE/Jasco ZW4005 on/off switch\
• 1 × Enbrighten ZWA4011ENB on/off switch\
• 1 × Enbrighten ZW4006 smart motion/on-off switch

Dimmers and companion switch

• 1 × GE/Jasco ZW3010 dimmer\
• 1 × GE/Jasco ZW3005 dimmer\
• 6 × GE/Jasco ZW3003 no-neutral incandescent dimmers\
• 1 × Evolve LRM-AS-W scene-capable dimmer\
• 1 × Enbrighten AS2005 wired add-on/companion switch

Plug-in modules

• 2 × GE ZW4201 outdoor plug-in smart switches\
• 5 × GE ZW4101 indoor light/appliance modules

Custom garage-door accessories

• 2 × custom-made 12-volt dry-contact relay adapters

The garage-door adapters are designed to work with one of the plug-in appliance modules or outdoor smart switches. A hub automation briefly turns the module on and then off, causing the relay to close its contacts and imitate a basic garage-door wall-button press.

The relay adapters are homemade accessories, not standalone Z-Wave devices. They provide contact closure only and do not report whether the garage door is open or closed. They are intended only for garage-door openers that accept a simple low-voltage dry-contact wall-button connection. They may not work with newer openers that use proprietary or digitally encoded wall controls. Buyer is responsible for confirming compatibility and safe installation.

Important compatibility notes

A compatible North American Z-Wave hub or controller is required. Some of these are older classic Z-Wave devices, while others are newer Z-Wave Plus or 700-series models. Jasco used some of the same internal “ZW” model numbers across multiple retail versions, so buyers should use the product-number and certification labels shown in the photos to determine the exact generation.

The AS2005 is a wired companion/add-on switch, not an independent Z-Wave device, and must be connected to a compatible Jasco/Enbrighten primary switch. The six ZW3003 dimmers are older no-neutral incandescent dimmers and should not be advertised as general-purpose LED dimmers.

Devices may need to be excluded or factory-reset before they can be added to a new Z-Wave network. Buyer is responsible for verifying hub compatibility, wiring requirements, lighting loads, and garage-door-opener compatibility.